If you are getting your property demolished or renovated and it was built before the ‘80s, you should be careful of the risks of asbestos. The debris may contain those deadly fibres that can cause potential harm to your health. Thus, it’s essential to dispose of them safely to ensure you don’t fall victim. And here, you will learn certain tips about the right approach to asbestos disposal.
Before stepping into the debris, find environment protection & management sites that accept asbestos disposal in your locality. Check the requirements and process before starting. Take early precautions like turning off heating or cooling (if working in a non-demolished building), putting on protective gear like masks, and keeping people and equipment not involved in disposal away.
During Asbestos Removal
An asbestos management plan is a need for the situation here. If you haven’t laid a plan yet, you can follow simple tips:
- Use plastic to cover the area and heavy-duty plastic beneath the contaminated material to avoid fibres escaping to the flooring.
- Spray water to reduce the risk of asbestos going airborne.
- Avoid breaking materials as this could disturb asbestos and release it into the air.
Transport and Disposal
Clean the area thoroughly with a wet cloth. Use asbestos disposal bags to carry all the materials, plastic sheets, and protective gear used during removal. Properly stack the bags so they won’t slip or slide. Label and transport them to the desired destination carefully.
While the process looks easy to read, you should avoid DIY and contract only licensed professionals for the removal and disposal of asbestos in Newcastle.
Asbestos, once good, is now considered a bad material for health and homes. And if you want to get it removed, it will be done through one of the two available methods, remediation and abatement. While both sound similar, there’re certain differences between the two. Here’s a quick overview of how abatement and remediation are different.
The primary goal of asbestos abatement is to remove the asbestos problem or enclose it, thereby cutting down on the risk factor. Before the abatement process begins, the building (particularly the area close to the affected features) is vacated. A contractor analyses the area and prepares a plan to treat the area, keeping safety and federal regulations in mind.
The process of asbestos abatement includes:
- Sealing the affected area of the building
- Hanging polyethylene sheets and using polyethylene tape to secure them
- Removing the contaminated material and placing it in securely taped polyethylene bags
- Using damp cloth and HEPA vacuum (wherever possible) to clean the remaining surface
The Difference from Asbestos Remediation
While abatement is all about treating the infected area, remediation goes deeper. It focuses on addressing the reasons that led to the asbestos occurrence. Abatement can be a part of the remediation process for asbestos treatment. Before starting the work, the contractor prepares a report about the area and the process. It comprises the problem’s scope, details about the area contaminated, removal recommendations, materials to be removed, and testing methods.
Finally, the removed asbestos is disposed of according to federal and state laws. That’s why you should contact asbestos inspection Newcastle experts for a professional approach.