Before you begin braiding anything with paracord, it is important to buy enough cables, given that the length of paracord you should buy depends on the type of braid you will do. Make a braided belt with a cobra for example, you will need about 50 to 70 feet of paracord depending on the size of your waist.
For smaller accessories such as a watch or bracelet band, about 15 feet should be enough. For a simple braid, a short length of rope can be used but generally, the rule of thumb is to cut out or order more than you think you'll need to be on guard. You can buy the best paracord through www.theparacordstore.com/.
For those of you who are just starting or are interested in starting their first projects with the greatest amount of ease, it would be better to start with a typical braid and use objects you can wrap paracord around each end while braiding to ensure that it is as tight as possible.
For a typical braided pattern, depending on the width of the item you are thinking of making, you will need to wrap at least 3 to 4 loops around the two nails fixed or post-type fixtures. Then began a vertically above and then below the horizontal cables while alternating strands.
Remember that you have to keep tightening the braid after each pass before moving on to the next strand. Once you have reached the desired length, remove the nail with care while securing each piece, and then pass them through the same set of loops. Easy, is not it?
Cobra weaves a little more complex, but still pretty easy. Braid type normally used in the manufacture of belt paracord survival. When using cobra weave you do not need to post remains as mentioned earlier, you, however, need a long enough length of paracord.